| Eastside Cruisers http://www.eastsidecruisers.com/forums/ |
|
| Crane vaccum reserve system? http://www.eastsidecruisers.com/forums/viewtopic.php?f=17&t=1169 |
Page 1 of 1 |
| Author: | LJWEPN [ Sun May 13, 2012 3:41 pm ] |
| Post subject: | Crane vaccum reserve system? |
since my engine build with much bigger cam, the brakes in my LJ are pretty crap and spongy (front disc, rear drums). suspect vacuum problem, might need to install a Crane vacuum reserve system or similar - where is a good brake place to test vacuum and get someone to have a look at it? |
|
| Author: | evil75 [ Sun May 13, 2012 5:18 pm ] |
| Post subject: | Re: Crane vaccum reserve system? |
if your brakes are spongy thats nothing to do with vacum, if your brake pedal is hard and you need to push very hard on the pedal to pull up the car that is a no vacum issue, id say your lines just need a good bleed they may have disconected a brake lines when they dropped your crossmember to change bushes and just never bleed them properly. |
|
| Author: | mr5000 [ Sun May 13, 2012 6:05 pm ] |
| Post subject: | Re: Crane vaccum reserve system? |
try bleeding as dave said doesnt sound like a vac problem if it was a vac problem you would be standing on the brake and bracing yourself to push them down |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|